Welcome To Pensla Impex

Mon – Sat  :  9:00 AM – 07:00 PM
|
Call Now :  +91-988-888-8789

Anchor Nuts Manufacturers in Tamil Nadu

Anchor Nuts Manufacturers in Tamil Nadu, Wholesale Suppliers Exporters
Anchor Nuts Manufacturers in Tamil Nadu, Wholesale Suppliers Exporters
Anchor Nuts Manufacturers in Tamil Nadu, Wholesale Suppliers Exporters
Anchor Nuts Manufacturers in Tamil Nadu, Wholesale Suppliers Exporters
Anchor Nuts Manufacturers in Tamil Nadu, Wholesale Suppliers Exporters

Pouring massive concrete walls means you need serious grip holding your formwork together in Tamil Nadu. If you are looking for Anchor Nuts Manufacturers in Tamil Nadu, though based in Jalandhar, we at Pensla Impex build the rugged hardware you need. Working actively as Formwork Anchor Nut Manufacturers, we make sure every piece locks down tight on the site in Tamil Nadu. Honest users in Tamil Nadu trust our Pensla Brand anchor nut items because they just do not snap under extreme physical pressure. In Tamil Nadu, we forge these components in sizes spanning 80 mm to 150 mm dia with 2 & 3 wing setups to perfectly match your wall specifications.

Anchor Nuts in Tamil Nadu

When the wet mix hits the frame, your hardware in Tamil Nadu takes an absolute beating. If you are looking for Anchor Nuts in Tamil Nadu, though based in Jalandhar, we cast components that simply refuse to crack. Pushing hard as Tie Rod Anchor Nut Manufacturers, we know that load limits matter immensely on a noisy job site. Smart buyers in Tamil Nadu always check the metal quality, so we melt down pure Malleable Casting BS32-12 or tough SG Iron Casting for every single batch. This heavy iron mix gives the gear an insane load capacity of 110 to 145 kN, while keeping the weight anywhere from a solid 350 grams up to a massive 1800 grams, or we just adjust the weight exactly as required in Tamil Nadu.

Tie Rod Nut Suppliers in Tamil Nadu

Foul weather and jammed threads will ruin a whole workday in Tamil Nadu if you buy cheap parts. If you are looking for Tie Rod Nut Suppliers in Tamil Nadu, though based in Jalandhar, we keep a massive inventory ready to load onto trucks. Operating as dedicated Scaffolding Anchor Nut Suppliers, we cut suitable threading for both 15/17 mm and 18/20 mm thick rods so they spin right on without catching in Tamil Nadu. Everyday consumers in Tamil Nadu really prefer our hardware because we let them choose between standard French or English thread styles. To stop rust dead in its tracks, in Tamil Nadu, we dip these units in a thick galvanized gold or clean silver finish so they easily survive sitting out in the rain.

Tie Rod Nut Exporters in Tamil Nadu

Moving heavy iron crates across borders takes real planning to avoid nasty dock delays and smashed boxes in Tamil Nadu. If you are looking for Tie Rod Nut Exporters in Tamil Nadu, though based in Jalandhar, we know exactly how to clear customs fast. Large global brands in Tamil Nadu trust our crew to manage the packing phase using a standard 50 pcs or 100 pcs bundle system. In Tamil Nadu, we strap every pallet down incredibly tight so nothing rattles around on rough ocean waves. Similarly, our long-time customers in Tamil Nadu keep coming back because we easily pack the boxes exactly as required to meet their local port rules without any hidden surprises.

Combination Plate Wing Nut Swivel Base Ductile Iron 160 KN in Tamil Nadu
Combination Plate Wing Nut Swivel Base Ductile Iron 160 KN Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (L)
Product Combination Plate (Wing Nut with Swivel Base)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 160 kN
Finish Electro Galvanized
Base Ø 120 MM
Weight (Kgs.) 1.250
Combination Plate Wing Nut Swivel Base Ductile Iron 160 KN in Tamil Nadu
Combination Plate Wing Nut Swivel Base Ductile Iron 160 KN Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (K)
Product Combination Plate (Wing Nut with Swivel Base)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 160 kN
Finish Electro Galvanized
Base Ø 120 MM
Weight (Kgs.) 1.150
Anchor Nut Large 3 Wing Ductile Iron 120 KN For Formwork in Tamil Nadu
Anchor Nut Large 3 Wing Ductile Iron 120 KN For Formwork Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (J)
Product Anchor Nut Large (3 Wing)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 120 kN
Finish Electro Galvanized
Base Ø 125 MM
Weight (Kgs.) 0.710
Base Ø 130 MM
Weights (Kgs.) 0.850 & 1.000
Anchor Nut 3 Wing Ductile Iron 110 MM Base For Formwork in Tamil Nadu
Anchor Nut 3 Wing Ductile Iron 110 MM Base For Formwork Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (I)
Product Anchor Nut (3 Wing)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 110 kN
Finish Electro Galvanized
Base Ø 110 MM
Weight (Kgs.) 0.780
Anchor Nut Butterfly Ductile Iron 110 KN For Concrete Formwork in Tamil Nadu
Anchor Nut Butterfly Ductile Iron 110 KN For Concrete Formwork Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (H)
Product Anchor Nut (Butterfly)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 110 kN
Finish Electro Galvanized
Base Ø 70 MM
Weight (Kgs.) 0.290
Anchor Nut 2 Wing Ductile Iron 90 KN For Concrete Formwork in Tamil Nadu
Anchor Nut 2 Wing Ductile Iron 90 KN For Concrete Formwork Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (G)
Product Anchor Nut / M Nut (2 Wing)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 90 kN
Finish Electro Galvanized
Base Ø 75/105 MM
Weight (Kgs.) 0.360
Anchor Nut 3 Wing Ductile Iron 110 KN For Concrete Formwork in Tamil Nadu
Anchor Nut 3 Wing Ductile Iron 110 KN For Concrete Formwork Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (F)
Product Anchor Nut (3 Wing)
Thread Size 15/17 MM
Material Casted (SG/Ductile or Malleable Iron)
Loading Capacity Up to 110 kN
Finish Electro Galvanized
Base Ø 70 MM
Weight (Kgs.) 0.375
Cast Iron Gogo Nut For 8 To 16 MM Bar Formwork Support Applications in Tamil Nadu
Cast Iron Gogo Nut For 8 To 16 MM Bar Formwork Support Applications Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Cast Iron Gogo Nut For 8 To 16 MM Bar Formwork Support Applications Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Cast Iron Gogo Nut For 8 To 16 MM Bar Formwork Support Applications Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Cast Iron Gogo Nut For 8 To 16 MM Bar Formwork Support Applications Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-10
Material Cast Iron
(A) Weight 0.160 Kgs. / Used for 8, 10 & 12 MM Bar
(B) Weight 0.320 Kgs. / Used for 8 to 16 MM Bar
Hex Bolt 1/2"
Finish Self Finish & Painted
Anchor Nut 2 Wing Collar Type SG Ductile Iron For Formwork Support in Tamil Nadu
Anchor Nut 2 Wing Collar Type SG Ductile Iron For Formwork Support Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Anchor Nut 2 Wing Collar Type SG Ductile Iron For Formwork Support Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (C)
Thread Size 15/17 MM & 20 MM
Material Cast SG/Ductile or Malleable Iron
Loading Capacity Up to 90 kN
Finish Electro Galvanized
Base Diameter 90 MM
Weights for 90 MM Base 0.330 & 0.385 Kgs.
Weight for 20 MM 0.400 Kgs.
3 Wing Anchor Nut SG Ductile Iron For Heavy Duty Formwork Support in Tamil Nadu
3 Wing Anchor Nut SG Ductile Iron For Heavy Duty Formwork Support Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (B)
Thread Size 15/17 MM & 20 MM
Material Cast SG/Ductile or Malleable Iron
Loading Capacity Up to 110 kN
Finish Electro Galvanized
Base Diameter 90 MM
Weights for 90 MM Base 0.410 & 0.450 Kgs.
Base Diameter 100 MM
Weights for 100 MM Base 0.450, 0.510, 0.570, 0.650 & 0.790 Kgs.
Weight for 20 MM 0.790 Kgs.
Anchor Nut Triangle Nut SG Ductile Iron For Formwork Tie Rods in Tamil Nadu
Anchor Nut Triangle Nut SG Ductile Iron For Formwork Tie Rods Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (E)
Thread Size 15/17 MM
Material Cast SG/Ductile or Malleable Iron
Loading Capacity Up to 90 kN
Finish Electro Galvanized
Base Diameter 50 MM
Weight for 50 MM Base 0.300 Kgs.
3 Wing Anchor Nut SG Ductile Iron For Heavy Duty Formwork Support in Tamil Nadu
3 Wing Anchor Nut SG Ductile Iron For Heavy Duty Formwork Support Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
3 Wing Anchor Nut SG Ductile Iron For Heavy Duty Formwork Support Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (D)
Thread Size 15/17 MM
Material Cast SG/Ductile or Malleable Iron
Loading Capacity Up to 90 kN
Finish Electro Galvanized
Base Diameter 90 MM
Weight for 90 MM Base 0.450 Kgs.
2 Wing Anchor Nut Cast Iron For Heavy Duty Formwork Support Work in Tamil Nadu
2 Wing Anchor Nut Cast Iron For Heavy Duty Formwork Support Work Manufacturers in Tamil Nadu,Wholesale Suppliers Exporters
Model FA-7 (A)
Thread Size 15/17 MM
Material Cast SG/Ductile or Malleable Iron
Loading Capacity Up to 90 kN
Finish Electro Galvanized
Base Diameter 90 MM
Weights for 90 MM Base 0.375 & 0.420 Kgs.
Base Diameter 100 MM
Weights for 100 MM Base 0.425, 0.480 & 0.560 Kgs.
Explore More
Related Categories
Company Profile

Get to know more about our company, manufacturing capabilities and commitment to quality products and reliable service.

About us
Pensla Impex Manufacturers, Suppliers & Exporters
Company Name Pensla Impex
Business Type Manufacturers, Suppliers & Exporters
Location Jalandhar, Punjab, India
Experience 1985
GST Status GST Verified
Supply Capability 35 TO 50 m
About Pensla Impex

When we started back in 1985, the goal was simple: build rugged, dependable scaffolding hardware that construction crews could actually trust with their lives fifty feet in the air.

Company Infrastructure